Roof Support #50 Properties

Details

Roof Support #50

Supports the roof as the Shearer passes underneath.

Face Roof Support

Properties

Name	Value
AFC Extension:	800mm [ 0 - 900, to 0 decimal place(s) ]
Cut Height:	-0.81m [ 0 - 4, to 2 decimal place(s) ]
Cycle Time:	xxs [ 0 - 25, to 1 decimal place(s) ]
Equipment Tag:	RS050
Height - Chock:	-344.28m [ -400 - -300, to 2 decimal place(s) ]
Height - Cut Floor:	xxmm [ -100 - 2250, to 0 decimal place(s) ]
Height - Cut Roof:	4,027mm [ 2250 - 4200, to 0 decimal place(s) ]
Height - To Rear:	4,022mm [ 2250 - 4200, to 0 decimal place(s) ]
Height - To Tip:	4,022mm [ 2250 - 4200, to 0 decimal place(s) ]
Mode - Support:	Set
Pitch - Base:	0.8 Deg [ -9 - 9, to 1 decimal place(s) ]
Pitch - Canopy:	xx Deg [ -9 - 9, to 1 decimal place(s) ]
Pitch - Pan:	0.8 Deg [ -9 - 9, to 1 decimal place(s) ]
Roll - Base:	xx Deg [ -15 - 15, to 1 decimal place(s) ]
Roll - Canopy:	xx Deg [ -12 - 12, to 1 decimal place(s) ]
Roll - Pan:	0.6 Deg [ -12 - 12, to 1 decimal place(s) ]
Sprag Position:	100% [ 0 - 100, to 0 decimal place(s) ]
Location:	Position: 294021.63, 6192907.55, 0 Scale: 2.43, 2.76, 6.67 Rotation: -0.81, 97.57, 1.3 Show On Map Show In 3D

Navigation